Weight decides the size
Shingles are heavy. A roof that looks small by area can still need a bigger container because of weight, not volume.
Roll off dumpster rental for roof tear offs in New Braunfels and the surrounding area. Shingles are heavy, so the right size depends more on weight than volume. This page covers how roof size, layers and shingle type change the size you need.
Shingles are heavy. A roof that looks small by area can still need a bigger container because of weight, not volume.
A single layer, average sized roof usually fits a 15 or 20 yard container with room for underlayment and flashing.
Tearing off two layers of shingles roughly doubles the weight from the same roof area.
Roofers measure in squares, 100 square feet each. Multiply your roof area by the number of layers to estimate squares.
A rough guide based on roof area and layers. Your exact size depends on shingle type and weight allowance, so use this as a starting point.
| Roof | Typical size | Notes |
|---|---|---|
| Up to 1,500 sq ft, 1 layer | 15 or 20 Yard | Most single story homes |
| 1,500 to 2,500 sq ft, 1 layer | 20 Yard | Typical average sized home |
| Any size, 2 layers | 20 or 30 Yard | Tear off doubles the weight |
| 2,500+ sq ft or large multi story | 30 Yard | Larger homes and steep roofs |
Get a size based on your exact roof area with the dumpster size calculator.
Asphalt shingles run roughly 200 to 400 pounds per square depending on the type, so a modest roof can weigh several tons. Most roof jobs hit the weight limit before the container looks full.
One layer versus two roughly doubles the weight for the same square footage. Mention this when you call so the size recommendation is accurate.
Architectural shingles are thicker and heavier per square than 3 tab shingles. The shingle type shifts the estimate.
Every provider sets a weight allowance and a per ton charge for going over it. Confirm both before delivery so there are no surprises at pickup.
Most single story homes with one layer of shingles fit a 15 or 20 yard container. Two layers, a large roof, or a multi story home usually needs a 20 or 30 yard because of weight, not size. Try the roof option in the dumpster size calculator for an estimate based on your roof area.
Asphalt shingles typically run about 200 to 400 pounds per square, roughly 100 square feet, depending on whether they are 3 tab or architectural. A 2,000 square foot roof with one layer of architectural shingles can weigh around 3 tons.
Usually yes. Tearing off two layers roughly doubles the weight for the same roof area, which often pushes the job into the next size up even though the volume looks similar.
Weight allowances vary by provider and container size. Going over it is billed per ton. See what factors affect your quote on the dumpster rental prices page, and confirm the exact allowance when you book.
Yes, roofing shingles, underlayment, felt paper and metal flashing can all go in a roll off dumpster. See the full list of what cannot go in a dumpster for items that are not allowed.
A dumpster on your own driveway usually does not need a permit. If it needs to sit on a street or right of way inside city limits, check first. See the dumpster permit guide.
Tell us your roof size and layers and get a size recommendation. Not sure? Try the dumpster size calculator first.
Call Now for a Free Quote